View PDTC124XU_1294873.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PDTC124X series
NPN resistor-equipped transistors; R1 = 22 k, R2 = 47 k
Rev. 06 -- 14 July 2005 Product data sheet
1. Product profile
1.1 General description
NPN Resistor-Equipped Transistors (RET) family.
Table 1: Product overview Package Philips PDTC124XE PDTC124XEF PDTC124XK PDTC124XM PDTC124XS [1] PDTC124XT PDTC124XU
[1]
Type number
PNP complement JEITA SC-75 SC-89 SC-59A SC-101 SC-43A SC-70 JEDEC TO-236 TO-92 TO-236AB PDTA124XE PDTA124XEF PDTA124XK PDTA124XM PDTA124XS PDTA124XT PDTA124XU
SOT416 SOT490 SOT346 SOT883 SOT54 SOT23 SOT323
Also available in SOT54A and SOT54 variant packages (see Section 2).
1.2 Features
s Built-in bias resistors s Simplifies circuit design s Reduces component count s Reduces pick and place costs
1.3 Applications
s General-purpose switching and amplification s Inverter and interface circuits s Circuit drivers
1.4 Quick reference data
Table 2: Symbol VCEO IO R1 R2/R1 Quick reference data Parameter collector-emitter voltage output current bias resistor 1 (input) bias resistor ratio Conditions open base Min 15.4 1.7 Typ 22 2.1 Max 50 100 28.6 2.6 Unit V mA k
Philips Semiconductors
PDTC124X series
NPN resistor-equipped transistors; R1 = 22 k, R2 = 47 k
2. Pinning information
Table 3: Pin SOT54 1 2 3 input (base) output (collector) GND (emitter)
R1
Pinning Description Simplified outline Symbol
2 1 2 3
001aab347 006aaa145
1
R2
3
SOT54A 1 2 3 input (base) output (collector) GND (emitter)
R1
2 1 2 3
001aab348 006aaa145
1
R2
3
SOT54 variant 1 2 3 input (base) output (collector) GND (emitter)
R1
2 1 2 3
001aab447 006aaa145
1
R2
3
SOT23; SOT323; SOT346; SOT416; SOT490 1 2 3 input (base) GND (emitter) output (collector)
1 2
006aaa144 sym007
3
R1
3 1
R2
2
SOT883 1 2 3 input (base) GND (emitter) output (collector)
1 3 2 Transparent top view 1
R2 R1
3
2
sym007
PDTC124X_SER_6
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 06 -- 14 July 2005
2 of 12
Philips Semiconductors
PDTC124X series
NPN resistor-equipped transistors; R1 = 22 k, R2 = 47 k
3. Ordering information
Table 4: Ordering information Package Name PDTC124XE PDTC124XEF PDTC124XK PDTC124XM SC-75 SC-89 SC-59A SC-101 Description plastic surface mounted package; 3 leads plastic surface mounted package; 3 leads plastic surface mounted package; 3 leads leadless ultra small plastic package; 3 solder lands; body 1.0 x 0.6 x 0.5 mm plastic single-ended leaded (through hole) package; 3 leads plastic surface mounted package; 3 leads plastic surface mounted package; 3 leads Version SOT416 SOT490 SOT346 SOT883 SOT54 SOT23 SOT323 Type number
PDTC124XS [1] SC-43A PDTC124XT PDTC124XU
[1]
SC-70
Also available in SOT54A and SOT54 variant packages (see Section 2 and Section 9).
4. Marking
Table 5: Marking codes Marking code [1] 32 32 51 DZ TC124X *46 *51 Type number PDTC124XE PDTC124XEF PDTC124XK PDTC124XM PDTC124XS PDTC124XT PDTC124XU
[1] * = -: made in Hong Kong * = p: made in Hong Kong * = t: made in Malaysia * = W: made in China
PDTC124X_SER_6
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 06 -- 14 July 2005
3 of 12
Philips Semiconductors
PDTC124X series
NPN resistor-equipped transistors; R1 = 22 k, R2 = 47 k
5. Limiting values
Table 6: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol VCBO VCEO VEBO VI Parameter collector-base voltage collector-emitter voltage emitter-base voltage input voltage positive negative IO ICM Ptot output current peak collector current total power dissipation SOT416 SOT490 SOT346 SOT883 SOT54 SOT23 SOT323 Tstg Tj Tamb
[1] [2] [3]
Conditions open emitter open base open collector
Min -
Max 50 50 7 +40 -7 100 100
Unit V V V V V mA mA
single pulse; tp 1 ms Tamb 25 C
[1] [1] [2] [1] [2] [3] [1] [1] [1]
-
-65 -65
150 250 250 250 500 250 200 +150 150 +150
mW mW mW mW mW mW mW C C C
storage temperature junction temperature ambient temperature
Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint. Reflow soldering is the only recommended soldering method. Device mounted on an FR4 PCB with 60 m copper strip line, standard footprint.
PDTC124X_SER_6
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 06 -- 14 July 2005
4 of 12
Philips Semiconductors
PDTC124X series
NPN resistor-equipped transistors; R1 = 22 k, R2 = 47 k
6. Thermal characteristics
Table 7: Symbol Rth(j-a) Thermal characteristics Parameter thermal resistance from junction to ambient SOT416 SOT490 SOT346 SOT883 SOT54 SOT23 SOT323
[1] [2] [3]
Conditions in free air
[1] [1] [2] [1] [2] [3] [1] [1] [1]
Min
Typ
Max
Unit
-
-
833 500 500 500 250 500 625
K/W K/W K/W K/W K/W K/W K/W
Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. Reflow soldering is the only recommended soldering method. Device mounted on an FR4 PCB with 60 m copper strip line, standard footprint.
7. Characteristics
Table 8: Characteristics Tamb = 25 C unless otherwise specified. Symbol ICBO ICEO Parameter collector-base cut-off current collector-emitter cut-off current emitter-base cut-off current DC current gain collector-emitter saturation voltage off-state input voltage on-state input voltage bias resistor 1 (input) bias resistor ratio collector capacitance VCB = 10 V; IE = ie = 0 A; f = 1 MHz Conditions VCB = 50 V; IE = 0 A VCE = 30 V; IB = 0 A VCE = 30 V; IB = 0 A; Tj = 150 C VEB = 5 V; IC = 0 A VCE = 5 V; IC = 5 mA IC = 10 mA; IB = 0.5 mA VCE = 5 V; IC = 100 A VCE = 300 mV; IC = 2 mA Min 80 2 15.4 1.7 Typ 0.8 1.1 22 2.1 Max 100 1 50 120 150 0.5 28.6 2.6 2.5 pF mV V V k Unit nA A A A
IEBO hFE VCEsat VI(off) VI(on) R1 R2/R1 Cc
PDTC124X_SER_6
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 06 -- 14 July 2005
5 of 12
Philips Semiconductors
PDTC124X series
NPN resistor-equipped transistors; R1 = 22 k, R2 = 47 k
103 hFE
006aaa174
103
006aaa175
(1) (2) (3)
VCEsat (mV)
102
102
(2) (1)
10
(3)
1 10-1
1
10 I C (mA)
102
10 1 10 I C (mA)
102
VCE = 5 V (1) Tamb = 100 C (2) Tamb = 25 C (3) Tamb = -40 C
IC/IB = 20 (1) Tamb = 100 C (2) Tamb = 25 C (3) Tamb = -40 C
Fig 1. DC current gain as a function of collector current; typical values
10
006aaa176
Fig 2. Collector-emitter saturation voltage as a function of collector current; typical values
10
006aaa177
VI(on) (V)
(1)
VI(off) (V)
(1)
1
(2) (3)
1
(2) (3)
10-1 10-1
1
10 I C (mA)
102
10-1 10-2
10-1
1 I C (mA)
10
VCE = 0.3 V (1) Tamb = -40 C (2) Tamb = 25 C (3) Tamb = 100 C
VCE = 5 V (1) Tamb = -40 C (2) Tamb = 25 C (3) Tamb = 100 C
Fig 3. On-state input voltage as a function of collector current; typical values
Fig 4. Off-state input voltage as a function of collector current; typical values
PDTC124X_SER_6
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 06 -- 14 July 2005
6 of 12
Philips Semiconductors
PDTC124X series
NPN resistor-equipped transistors; R1 = 22 k, R2 = 47 k
8. Package outline
1.8 1.4 3 0.45 0.15
0.95 0.60
3.1 2.7 3 0.6 0.2
1.3 1.0
1.75 0.9 1.45 0.7
3.0 1.7 2.5 1.3
1
2 0.30 0.15 1 0.25 0.10 04-11-04
1
2 0.50 0.35 0.26 0.10 04-11-11
1.9 Dimensions in mm
Dimensions in mm
Fig 5. Package outline SOT416 (SC-75)
0.62 0.55 0.55 0.47 0.30 0.22 3
Fig 6. Package outline SOT346 (SC-59A/TO-236)
0.50 0.46
4.2 3.6
0.45 0.38
0.65 0.30 0.22 0.20 0.12 0.35 Dimensions in mm
1.02 0.95 4.8 4.4
0.48 0.40 1 2 2.54 3 1.27
2
1
5.2 5.0 03-04-03 Dimensions in mm
14.5 12.7 04-11-16
Fig 7. Package outline SOT883 (SC-101)
Fig 8. Package outline SOT54 (SC-43A/TO-92)
0.45 0.38 4.2 3.6 1.27
4.2 3.6
0.45 0.38 0.48 0.40 1
3 max
2.5 max 1
0.48 0.40 2 2.54 3 1.27
4.8 4.4
2 5.08 2.54 3 5.2 5.0 14.5 12.7 04-06-28 5.2 5.0 Dimensions in mm 14.5 12.7 4.8 4.4
Dimensions in mm
05-01-10
Fig 9. Package outline SOT54A
PDTC124X_SER_6
Fig 10. Package outline SOT54 variant
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 06 -- 14 July 2005
7 of 12
Philips Semiconductors
PDTC124X series
NPN resistor-equipped transistors; R1 = 22 k, R2 = 47 k
3.0 2.8
3
1.1 0.9
2.2 1.8 3 0.45 0.15
1.1 0.8
0.45 0.15 2.5 1.4 2.1 1.2 2.2 1.35 2.0 1.15
1
2
1 0.48 0.38 0.15 0.09 04-11-04 Dimensions in mm
2 0.4 0.3 1.3 04-11-04 0.25 0.10
1.9 Dimensions in mm
Fig 11. Package outline SOT23 (TO-236AB)
1.7 1.5 3
Fig 12. Package outline SOT323 (SC-70)
0.8 0.6 0.5 0.3
1.7 0.95 1.5 0.75
1
2 0.33 0.23 1 0.2 0.1 98-10-23
Dimensions in mm
Fig 13. Package outline SOT490 (SC-89)
PDTC124X_SER_6
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 06 -- 14 July 2005
8 of 12
Philips Semiconductors
PDTC124X series
NPN resistor-equipped transistors; R1 = 22 k, R2 = 47 k
9. Packing information
Table 9: Packing methods The indicated -xxx are the last three digits of the 12NC ordering code. [1] Type number Package PDTC124XE PDTC124XK PDTC124XM PDTC124XS SOT416 SOT346 SOT883 SOT54 SOT54A Description 4 mm pitch, 8 mm tape and reel 4 mm pitch, 8 mm tape and reel 4 mm pitch, 8 mm tape and reel 2 mm pitch, 8 mm tape and reel bulk, straight leads tape and reel, wide pitch tape ammopack, wide pitch SOT54 variant bulk, delta pinning PDTC124XT PDTC124XU
[1]
Packing quantity 3000 4000 -115 -115 -215 -115 -115 5000 10000 -412 -112 -135 -135 -315 -116 -126 -235 -135
PDTC124XEF SOT490
SOT23 SOT323
4 mm pitch, 8 mm tape and reel 4 mm pitch, 8 mm tape and reel
For further information and the availability of packing methods, see Section 15.
PDTC124X_SER_6
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 06 -- 14 July 2005
9 of 12
Philips Semiconductors
PDTC124X series
NPN resistor-equipped transistors; R1 = 22 k, R2 = 47 k
10. Revision history
Table 10: Revision history Release date 20050714 Data sheet status Product data sheet Change notice Doc. number Supersedes PDTC124X_SERIES_5 Document ID PDTC124X_SER_6 Modifications:
* * * * * * * *
The format of this data sheet has been redesigned to comply with the new presentation and information standard of Philips Semiconductors. Table 6 "Limiting values": typing error for value of VEBO emitter-base voltage corrected Table 8 "Characteristics": Vi(on) redefined to VI(on) on-state input voltage Table 8 "Characteristics": Vi(off) redefined to VI(off) off-state input voltage Figure 1, 2, 3, 4, 9 and 10: added Figure 5, 6, 7, 8, 11, 12 and 13: superseded by minimized package outlines Section 9 "Packing information": added Section 14 "Trademarks": added Product specification Product specification Product specification Product specification Product specification Preliminary specification Preliminary specification 9397 750 13672 PDTC124X_SERIES_4 9397 750 11018 PDTC124XEF_2 PDTC124XE_3 9397 750 05861 PDTC124XE_2 9397 750 04129 PDTC124XE_1 9397 750 03081 9397 750 05862 PDTC124XEF_1 9397 750 04644 -
PDTC124X_SERIES_5 20040813 PDTC124X_SERIES_4 20030410 PDTC124XE_3 PDTC124XE_2 PDTC124XE_1 PDTC124XEF_2 PDTC124XEF_1 19990518 19980921 19971215 19990518 19981111
PDTC124X_SER_6
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 06 -- 14 July 2005
10 of 12
Philips Semiconductors
PDTC124X series
NPN resistor-equipped transistors; R1 = 22 k, R2 = 47 k
11. Data sheet status
Level I II Data sheet status [1] Objective data Preliminary data Product status [2] [3] Development Qualification Definition This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN).
III
Product data
Production
[1] [2] [3]
Please consult the most recently issued data sheet before initiating or completing a design. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
12. Definitions
Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
14. Trademarks
Notice -- All referenced brands, product names, service names and trademarks are the property of their respective owners.
13. Disclaimers
Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors
15. Contact information
For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com
PDTC124X_SER_6
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 06 -- 14 July 2005
11 of 12
Philips Semiconductors
PDTC124X series
NPN resistor-equipped transistors; R1 = 22 k, R2 = 47 k
16. Contents
1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description. . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 3 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4 Thermal characteristics. . . . . . . . . . . . . . . . . . . 5 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 7 Packing information. . . . . . . . . . . . . . . . . . . . . . 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 10 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 11 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Contact information . . . . . . . . . . . . . . . . . . . . 11
(c) Koninklijke Philips Electronics N.V. 2005
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 14 July 2005 Document number: PDTC124X_SER_6
Published in The Netherlands

▲Up To Search▲

Price & Availability of PDTC124XU

	To Download PDTC124XU Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .